Energy HE
Digital Solar Circuit Controller Energy HE
Solar circuit controller for the complete control of solar power systems Control of solar power systems with a solar circuit, integrated multi-function controller for expanding the functions of systems with flexibility.
| Article | Description |
|---|---|
| 1316ENERGY-HE-1A-G | Energy HE solar controller |
General Details
- Comfortable and intuitive user interface with 4 operating buttons
- 1 pre-defined solar diagram – 1 collector, 1 storage tank or swimming pool
- Energy yield measurement (flow sensor)
- Intelligent pump speed control
- Heat source minimum temperature
Tube collector function, time-controlled
Holiday mode (recooling)
Protective functions:
– System protection
– Collector protection
– Flow monitoring
- Service and status messages with flashing symbols in the display
- Manual mode
- Parameters remain consistent even after a power outage
- 2 outputs 230V AC (standard pumps are not speed-controlled)
- 1 control output for HE pump PWM
- 4 temperature inputs for Pt1000
- Output R2 can be used as a multi-function controller programmable
Technical Data
| Operating voltage: | AC 230 Volt, 50 Hz, –10 to +15 % | Protection: | Microfuse 5 × 20 mm, 2 A/T (2 Ampere, slow) |
| Standby consumption: | 0,8 W | Ambient temperature: | 0 to +40 °C |
| Outputs: | Relay, 230 V AC, 50 Hz, min. 10 mA, max. 1 A, with cos φ >= 0,9 | Storage temperature: | –10 to +60 °C |
| Control output for HE pumps: | PWM signal: 100 Hz, ViL < 0,5 V DC, ViH > 9 V DC, 10 mA max. | Housing material: | 100 % recyclable ABS housing |
| Total output of all outputs: | max. 300 W | Dimensions: | L x W x D in mm 175 x 134 x 56 |
| Inputs: | Temperature inputs with fine-level surge protection for PT 1000 temperature sensors, measuring range: –30 °C to +250°C | Protection class: | IP20 according to DIN 40050, EN 60529 |