HydroFlex HKM 300-DN25

Pump group with integrated electronics

Pre-wired system module with integrated electronics, compatible with grandis 650 HK via BUS cable. Ready for connection, no additional electrical installation work required.
Twin-line pump group, tube spacing 125 mm, equipped with a high-efficiency pump Class A. Supply line and return flow ball valve with thermometer handle 0 – 120 °C. The return flow ball valve is equipped with an adjustable gravity brake.. A threeway mixer is integrated between the supply line and the return line. The supply line and return line are equipped in addition with a shut-off valve for boiler connections. The mixer and the pump can be replaced without the system needing to be emptied. Based on Tuxhorn tubra® - duotherm pump module.
Pre-assembled, pre-wired, tested for leaks, optimum thermal insulation, with integrated electronics.  
Article Description
1402HS-HKG05-1A-G HydroFlex HKM300 DN25
1402HS-HKG08-1B-G HydroFlex HKM300 DN25 without display

Description

Pump group with mixer

  • Wilo HE pump, Class A, delivery height 6 m
  • 3-way mixer with drive, air-cooled
  • System connections 1″ female thread
  • 2 thermometers for indicating supply and return line temperature 0 – 120°C
  • Supply line and return line ball cock with thermometer handle
  • Integrated gravity brake
  • The mixer and the pump can be replaced without the system needing to be emptied
  • High-grade insulation cases
  • Compact design
  • Wall mounting material
  • Tube clearance 125 mm
  • Integrated display for indicating values
  • Plug-in bus connection
  • No other materials required
  • 4 stations can be added

 

Integrated control system

  • Compatible with REGULA grandis 650 HK via bus connection
  • Display for indicating values, e.g. supply line and return line temperature
  • Assignment of the heating circuit
  • Manual test mode – Pump on/off and Mixer open/Mixer closed
  • Mains cable with earthing pin plug
  • In and outgoing bus connection with XLR plug and socket
Technical Data

Technical data of the Tuxhorn tubra® dualtherm pump group

Nominal width:DN25Nominal rating:Kvs 4,0: 8 (16) kW; Kvs 8,0: 18 (36) kW
Clearance between supply line and return line:125 mmOpening pressure per gravity brake:20 mbar
Connection:G1½" on the boiler side and Rp 1" on the heating line sideMedia:heating water according to VDI 2035
Pump connection:for pumps with 1½" male thread, overall length
180 mm
Actuator:230 V, running time at 90° angle of rotation: 105 seconds
Temperature measuring range of analog indicators:0 - 120°CDimensions incl. insulation:H x W x D in mm 450 x 250 x 185
Max. operating temperature:95°CDelivery height:depends on the pump installed
Max. operating pressure:3 barProtection class:IP44 according to IEC529

Technical Data of the control system

Operating voltage:AC 230 Volt, 50 Hz, -10 to +15%Protection class of the terminal:IP30 according to DIN 40050, EN 60529
Mains cable:Earthing pin plug, with 2m mains cableProtection class of the IO unit:IP44 according to DIN 40050, EN 60529
Standby losses:1 WAmbient temperature:0 to +40°C
Display:LCDStorage temperature:-10 to +60°C
Bus connection:each with 1 XLR plug and socketHousing material:100% recyclable ABS housing
Dimensions of the terminal:H x W x D in mm 144 x 102 x 11